Equipment of series KAM 7 IQ

 KAM 780 IQKAM 780 S IQKAM 790 IQKAM 792 IQKAM 795 IQ
Pre-milling unitpneumatic control, CW and CCW turning, 2 x 3.7 kW, 12,000 RPM
Edge banding magazineendless and strip materialendless and strip material
2 + 2		endless and strip material
2 magazines		endless and strip material
8 magazines
Trimming unit for endless edgesknife
Glue stationEVA glue from beneath
Pressure zone5 roller pressure zone, one cylinder driven5 roller pressure zone,
one roller driven		7 roller pressure zone,
one cylinder driven		5 roller pressure zone,
one cylinder driven
End sawmanually tiltable 0-15°, 2 x 0.37 kW. 12,000 RPM
Rough milling unit2 motors, 2 x 0.75 kW, 12,000 RPMneinnein
Fine milling unit2 x 0.55 kW, 12,000 RPM1: 2 x 0.75 kW, 12,000 RPM
2: 2 x 0.55 kW, 12,000 RPM

2 x 0.55 kW, 12,000 RPM

Corner rounding unit2 x 0.3 kW, 18,000 RPM4 x 0.3 kW, 18,000 RPM
Profile scraping unityesyesyesyes, double unityes
Flat scraping unityesyesnoneyesyes
Buffing unit0.25 kW, 1,325 RPM2 x 0.37 kW, 1,325 RPM, oscillating
Spraying unitin front of pre-milling and buffing unit
Feed rate3 kW, 12-22 m/min, stepless
Reference edgeleft
Set-up dimensions7,700 x 1,450 x 1,650 mm9,000 x 1,450 x 1,650 mm9,470 x 1,450 x 1,650 mm10,500 x 1,450 x 1,650 mm10,970 x 1,450 x 1,650 mm

 

Modelle der Serie KAM 7 IQ im Überblick

Workpiece and edge parameters

 KAM 780 IQKAM 780S IQKAM 790 IQKAM 792 IQKAM 795 IQ
Workpiece thickness10 mm – 60 mm
with corner rounding10 mm – 45 mm
Workpiece width     
without corner roundingmin. 80 mmmin. 60 mm
with corner roundingmin. 130 mm
Workpiece length     
without corner roundingmin. 120 mm
with corner roundingmin. 140 mm
with pre-millingmin. 320 mm
Edge thickness     
without corner rounding0.4 - 3 mm0.4 - 8 mm
(solid wood edges)		0.4 - 3 mm
with corner rounding1.2 - 3 mm
Edge width15 - 65 mm
Electric equipment     
operating voltage400 V – 3 phases – 50 Hz
frequency converterelectronically